Adjustable Rotating Face
This part is a replacement rotating jet face for select Hot Spring hot tubs. Cool grey with stainless steel accents designed to increase water pressure when secured in your spa with screws.
Insert into the wall fitting and secure it into the hot tub. Compatible with 1996 to 2015 Hot Spring Highlife, Hot Spot, Solana, and Tiger River spa models.
*Check specs section for full list of compatible models and years.
Specifications
| Make |
Model |
Date Range |
| Hot Spring |
Grandee |
2006-2011 |
| Hot Spring |
Vista |
2006-2011 |
| Hot Spring |
Envoy |
2006-2011 |
| Hot Spring |
Vanguard |
2006-2011 |
| Hot Spring |
Jetsetter |
2006-2011 |
| Hot Spring |
Prodigy |
2006-2011 |
| Hot Spring |
Sovereign |
2006-2011 |
| Hot Spring |
Accolade |
2006 |
| Hot Spring |
Aria |
2007-2011 |
| Tiger River |
Bengal |
2006-2010 |
| Tiger River |
Caspian |
2006-2010 |
| Tiger River |
Sumatran |
2006-2010 |
| Tiger River |
Bengal Model MM |
2006-2010 |
| Item |
|
part # |
| 1 |
Kit Wall Fitting |
71361 |
| 2A |
Rotary Jet Face White |
71363 |
| 2B |
Rotary Jet Face C. Grey |
71364 |
| 2C |
Rotary Jet Face W Grey |
73301 |
| 2D |
Rotary Jet Face Taupe (use 73301) |
73301 |
| 2E |
Rotary Face Esc W grey |
73812 |
| 2F |
Rotary Face Esc C Grey |
73900 |
| 3 |
Gasket Adj Rotary Jet |
36534 |
| 4A |
Rotary Jet White |
71619 |
| 4B |
Rotary Jet C Grey |
71690 |
| 4C |
Rotary Jet W Grey |
73303 |
| 4D |
Rotary Jet Taupe |
71880 |
| 5A |
Directional Jet White |
71691 |
| 5B |
Directional Jet C Grey |
71692 |
| 5C |
Directional Jet W Grey |
73304 |
| 5D |
Directional Jet Taupe |
71881 |
| 6 |
Wall Fitting Front Adj Jet |
35977 |
| 7 |
O ring Front Wall Adj |
35988 |
| 8 |
O Ring Adj jet (small) |
35986
|
| Removal |
- Open or remove the spa cover.
- Remove the jet by grasping the jet faceplate and pulling it away from the spa shell.
- With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
- To reinstall the jet, reverse steps 1 to 3.
Important: Make sure that the o-rings are properly seated.
|
|
Reviews
There are no reviews yet.