Soothing Seven Jet Face, Warm Grey
This part is a replacement soothing seven jet face for select Hot Spring hot tub models. The Soothing 7 Jet is a larger jet with seven outlets. The seven outlets are designed to massage the tight muscles of the upper back and shoulders.
The intensity of the Soothing 7 Jet increases when more air is injected into the jet. Turning the faceplate can control the amount of air reaching an individual jet. To adjust the air, turn the faceplate clockwise to increase the air, or counter-clockwise to decrease the air. Compatible with 2006 to 2011 Hot Spring Highlife spa models.
*Check specs section for full list of compatible models and years.
Specifications
| Make |
Model |
Date Range |
| Hot Spring |
Grandee |
2006-2011 |
| Hot Spring |
Vista |
2006-2011 |
| Hot Spring |
Envoy |
2006-2011 |
| Hot Spring |
Vanguard |
2006-2011 |
| Hot Spring |
Jetsetter |
2006-2011 |
| Hot Spring |
Prodigy |
2006-2011 |
| Hot Spring |
Sovereign |
2006-2011 |
| Hot Spring |
Aria |
2007-2011 |
l
| Item |
|
Part number |
| 1 |
kit wall fitting |
71362 |
| 2a |
Jet Face White |
71366 |
| 2b |
Jet Face C Grey |
71367 |
| 2c |
Jet Face W Grey |
73293 |
| 2d |
Jet Face Taupe |
72486 |
| 2e |
Jet face escutcheon c grey |
73902 |
| 2e |
Jet face escutcheon w grey |
73814 |
| 3 |
Gasket |
36535 |
| 4 |
o ring |
35986 |
| 5 |
Front Wall Fitting |
36087 |
| 6 |
o-ring |
36153 |
| Removal |
- Open or remove the spa cover.
- Remove the jet by grasping the jet faceplate and pulling it away from the spa shell.
- With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
- To reinstall the jet, reverse steps 1 to 3.
Important: Make sure that the o-rings are properly seated.
|
| Removal |
- Open or remove the spa cover.
- Remove the jet by grasping the jet faceplate and pulling it away from the spa shell.
- With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
- To reinstall the jet, reverse steps 1 to 3.
Important: Make sure that the o-rings are properly seated.
|
|
Reviews
There are no reviews yet.