This white lens wall fitting assembly is for 1989-1999 Hot Spring hot tub models.
The spa light is visible through the light lens located in the bench seat of the spa. Turning the light dial located on the control panel controls the light intensity and activation.
| Removal |
- Disconnect power to the spa.
- Access the equipment compartment.
- Carefully lift the back of the bulb (with the socket assembly still attached) until the bottom of the bulb snaps out of the retainer.
- Slowly pull the bulb and socket assembly to the front of the equipment compartment.
- Note: It may be necessary to negotiate the assembly through the other equipment.
- Remove the old bulb and install the new one.
- To reinstall the bulb into the retainer, engage two of the three bulb retainers with the top of the bulb. After the top is engaged, carefully push down on the back of the bulb until it snaps into the third bulb retainer.
|
Specifications
|
| Item |
|
Part # |
| 1A |
Light Bezel White (Endural Spas) |
71921 |
| 1B |
Light Bezel Cool Gray (Blue and Jade Spas) |
71922 |
| 1C |
Light Bezel Warm Gray (Copper and Pearl Spas) |
73300 |
| 1D |
Light Bezel Taupe |
39884 |
| 1E |
Light Bezel Escutcheon (Azurite and SWM Spas) |
73905** |
| 1F |
Light Bezel Escutcheon (Other Colors) |
73816** |
| 2 |
Lens Only Replacement Kit |
71830 |
| 3A |
Wallfitting Assy White (1989-1999 Only) |
71923 |
| 3B |
Wallfitting Assy Cool Gray 9 (1989-1999 Only) |
71924 |
| 4A |
Light Lens Retrofit Kit 1989-1999 (HSS White) |
71832** |
| 4B |
Light Lens Retrofit Kit 1989-1999 (HSS Gray) |
71833** |
| 5 |
Wallfitting |
71925 |
| * |
Lens Light Flat (pre-1989 Spas) |
30810 |
| * |
Devcon Repair Kit |
72961 |
| * |
Grip Style Glove |
71945 |
|
Reviews
There are no reviews yet.