Name: 71363 Adjustable Rotary Jet Face, White
SKU: 71363
Availability: InStock

71363 Adjustable Rotary Jet Face, White

Adjustable Rotary Jet Face

This part is a replacement adjustable rotary jet for select Hot Spring hot tubs. The adjustable jet comes with a standard nozzle that can be adjusted to point in various directions within the spa.

The rotary jet divides the water flow into two streams, then spins. The amount of air reaching an individual jet can typically be controlled in two ways. The intensity of the jets increases when more air is injected into the jet.

The jet is made in white to match the tub. Compatible with 1997 to 2005 Hot Spring Highlife spa models.

*Check specs section for full list of compatible models and years.

Specifications

Make	Model	Date Range
Hot Spring	Grandee	1997-2005
Hot Spring	Vanguard	2001-2005
Hot Spring	Jetsetter	1997-2005
Hot Spring	Prodigy	1997-2005
Hot Spring	Sovereign	1997-2005
Hot Spring	Classic	1997-2000
Hot Spring	Landmark	1997-2003

Item		part #
1	Kit Wall Fitting	71361
2A	Rotary Jet Face White	71363
2B	Rotary Jet Face C. Grey	71364
2C	Rotary Jet Face W Grey	73301
2D	Rotary Jet Face Taupe (use 73301)	73301
2E	Rotary Face Esc W grey	73812
2F	Rotary Face Esc C Grey	73900
3	Gasket Adj Rotary Jet	36534
4A	Rotary Jet White	71619
4B	Rotary Jet C Grey	71690
4C	Rotary Jet W Grey	73303
4D	Rotary Jet Taupe	71880
5A	Directional Jet White	71691
5B	Directional Jet C Grey	71692
5C	Directional Jet W Grey	73304
5D	Directional Jet Taupe	71881
6	Wall Fitting Front Adj Jet	35977
7	O ring Front Wall Adj	35988
8	O Ring Adj jet (small)	35986

Removal

Open or remove the spa cover.
Remove the jet by grasping the jet faceplate and pulling it away from the spa shell.
With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
To reinstall the jet, reverse steps 1 to 3.
Important: Make sure that the o-rings are properly seated.