Shaft Seal Kit
This part is a replacement shaft seal kit for the Wavemaster 7000 & 9000 jet pump for select hot tubs. The shaft seal is a piece that is meant to keep water out of the shaft of the motor.
If damaged, the seal will not stop water from leaking around the volute of the pump. This leak may be confused with a problem with the volute, so make sure the shaft seal is working properly before replacing the volute. Compatible with 1989 to 1996 Hot Spring Highlife spa models.
*Check specs section for full list of compatible models and years.
Specifications
|
| Item |
|
Wavemaster 7000 |
Wavemaster 9000 |
| 1 |
Motor Wave |
|
|
| 2 |
Screw 10 x 1/2″ PAN PHH |
71034 |
71034 |
| 3 |
Bonding Lug Wave 7000 & 9000 |
71031 |
71031 |
| 4 |
Screw Hex 2/8-16 x 1″ |
70956 |
70956 |
| 5 |
Nut Hex 8-16 Wave |
70955 |
70955 |
| 6 |
Washer Lock 3/8″ Wave |
70954 |
70954 |
| 7 |
Washer Flat 3/8″ Wave |
70953 |
70953 |
| 8 |
Seal Plate Wave |
70941 |
70941 |
| 9 |
O-Ring Seal Plate Wave |
70942 |
70942 |
| 10 |
Shaft Seal Waved 7000 & 9000 |
71030 |
71030 |
| 11 |
Gasket Impeller Screw Wave 9000 |
N/A |
70945 |
| 12 |
Screw Impeller Wave 9000 |
N/A |
70946 |
| 13 |
Diffuser Wave |
70947 |
70947 |
| 14 |
O-Ring Diffuser Wave |
70948 |
70948 |
| 15 |
Volute Wave |
70960 |
70960 |
| 16 |
Drain Fitting Wave |
32267 |
32267 |
| 17 |
Screw Hi-Lo 5/16-14 X 5/8 Wave 9000 |
N/A |
N/A |
| 18 |
Base Wave 9000 |
N/A |
N/A |
| 19 |
Motor Pad Wave 9000 |
N/A |
N/A |
| 20 |
Screw 8-32 x 7/8 RD HD Wave |
70951 |
70951 |
| 21 |
Washer Lock #8 EXT Tooth Wave |
70952 |
70952 |
| 22 |
Impeller Wave 7000 & 9000 |
71029 |
71029 |
| 23 |
Slinger Wave |
70940 |
70940 |
| 24 |
Shroud Wave |
34480 |
34480 |
| 25 |
Rubber Pad Wave 7000 |
71028 |
N/A |
| 26 |
Base Steel Wave 7000 |
71027 |
N/A |
| 27 |
Pad Base Rubber Wave 7000 |
N/A |
N/A |
| 28 |
Union Riser |
35282 |
N/A |
| 29 |
O-Ring Union Riser |
N/A |
N/A |
| * |
Pump Wavemaster 7000 |
35522 |
N/A |
| * |
Pump Wavemaster 9000 with Shroud |
N/A |
34462
|
|
Reviews
There are no reviews yet.