Aquablanc O2 Tablets 1kg

Aquablanc O2 Tablets are used in the chlorine free spa water treatment system, Aquablanc. To be used in conjunction with Aquablanc A Combination Liquid

ABOUT AQUABLANC

The Aquablanc Active O2 system is a dual action non-chlorine system requiring a weekly dose of Aquablanc A Combination Liquid, combined with O2 Tablets dosed via a floating dispenser prior to bathing.

FAQ

WHAT IS ACTIVE OXYGEN?

Active Oxygen sanitation is based on potassium monopersulphate tablets.Potassium monopersulphate works in a similar way as chlorine or bromine in that it kills bacteria and breaks down bather waste. However, unlike chlorine or bromine, monopersulphates don’t produce by-products that irritate the skin or eyes and cause nasty smells. Active Oxygen O2 tablets are used in conjunction with a weekly does of a liquid activator which also acts as an algaecide.

WHEN SHOULD I TEST THE ACTIVE OXYGEN LEVEL?

Always test one hour after application of the O2 tablets. The reading should be 5 – 10 ppm one hour after application.

What TA and pH levels should I maintain When using O2 as a sanitiser you should maintain the following water balance: TA 80 – 160 ppm pH 7.0 – 7.4 Total Hardness 250 – 500 ppm

DO I STILL NEED TO USE A SHOCK TREATMENT?

Yes. A shock is necessary with any hot tub water treatment system because this is the only way of removing dissolved organic contaminants, such as perspiration, body oil, spray tan, make-up, etc from the water. You should shock weekly with Spa Fusion or a non chlorine shock depending on your hot tub use.

WHAT IS THE PROCESS TO SWITCH TO AQUABLANC?

Simply drain your spa water, clean your filters and re-fill fresh to ensure no excess chlorine or bromine is in the system.

I AM ALLERGIC TO CHLORINE, IS THIS OK FOR ME?

Yes, this is a non-chlorine and non-bromine system. 

IS AQUABLANC SUITABLE FOR INFLATABLE HOT TUBS?

Yes, Aquablanc is perfectly fine for any type of hot tub. 

1. Before converting a hot tub onto the Aquablanc system, it is recommended that the spa is drained, re-filled and then oxidised with a shock chlorine product (e.g. Aquasparkle Spa Fusion). Brand new spas require an initial chlorine shock or start up dose of 50mg/l (ppm) of free chlorine circulated for a minimum of an hour. 
2. Maintain PH Levels within the ideal range of 7-7.4
3. Initial Dose: add 60ml of Aquablanc A Combination and 2 Aquablanc O2 Tablets per 1,500 litres of water. 
4. Continuous Treatment: Add weekly, 15ml Aquablanc A Comination Liquid per 1,500 litres of spa water and seperatley prior to bathing add one Aquablanc O2 Tablet per 1,500 litres of spa water. 
5. Aquablanc A Comination Liquid can be added directly to your hot tub water whilst the pumps are on to aid distribution.
6. Aquablanc O2 Tablets should be dosed via floating dispenser.
7. Test the pxygen level 1 hour after application of O2 Tablets. The oxygen level should be between 5-10mg/l (ppm).
8. A weekly application of AquaSPArkle Spa Fusion is recommended.