Name: 72991 Jet Pump 1.5 HP 2 SPD
SKU: 72991
Availability: InStock

Jet Pump 1.5 HP 2 SPD

This part is a replacement jet pump 1.5 HP 2 SPD for select Caldera hot tub models. Provides water pressure for the hydrotherapy system by recirculating water from the spa.

These pumps are designed for the presence of water at all times. Compatible with 2003 to current Caldera and Hot Spot spa models.

*Check specs section for full list of compatible models and years.

Specifications

Make	Model	Date Range
Hot Spot	Relay	2010-Current
Hot Spot	Rhythm	2010-Current
Hot Spot	Tempo	2010-Current
Hot Spot	Mallorca	2003-2009
Hot Spot	La Palma	2008-2009
Hot Spot	Sprint	2010-2011
Hot Spot	Dash	2010-2011
Caldera	Martinique	2008-2015
Caldera	Palatino	2010-Current
Caldera	Marino	2010-Current
Caldera	Vanto	2011-Current
Caldera	Palomar	2004-2005
Caldera	Olympia	2002-2009
Caldera	Cima	2010-2011
Caldera	Lina	2010-2011

2.5 HP, 2 SP, 230V, 60 HZ, 11 AMP (High Speed)
2.5 HP, 2 SP, 230V, 60 HZ, 3.3 AMP (LowSpeed)

Removal

Disconnect power to the spa.
Access the equipment compartment.
Drain the spa.
Disconnect the the jet pump from the control box.
Remove the copper bonding wire from the bonding lug on the jet pump motor.
Drain the pump by removing bleedline from the drain barbfitting or plug.
Turn the jet pump unions counterclockwise on the intake and discharge of the jet pump to disconnect them from the plumbing.
Note: Make sure to save the union o-rings.
Remove the mounting bolt(s) securing the jet pump to the equipment compartment floor.
Remove the jet pump from the equipment compartment.
To reinstall the jet pump, reverse steps 1 to 9.
Important: Make sure that the jet pump union o-rings are properly seated when re-tightening the unions.

Item No	Part No
1	71415	Magnifold xp Magnetek
2	**	Motor, mag, 48fr, 1.5/.18 hp, 8.0/2.6a, 230v
3	71036	Fitting, compress 2″ w/o-ring
4	71693	Volute 48fr xp2
5	71447	Kit, shaft seal assembly
6	71404/na	Impeller 1.5 hp, xp
7	71409	Wear ring, xp
8	71554	o-ring, volute
9	71696	Cover, suction xp2
10	32267	Drain plug, pump
11	72344	Kit, cal pump hose duct
12	017066	Mount, rubber-pump
13a	72178/na	Cord 2-spd 14/4 60in pre2002
13b	72461	Kit, pump cord 14/4 2spd strs 2002 – curr
14	71413	Screw, 8-32 x 5/8, (xp volute)
15	34447	O-ring, compress fitting 2″
16	71594	O-ring, drain
*	72991	Pump, 1.5 hp, 230v 60 hz, 2 spd, xp2