Grey Control Panel Pushbutton Assembly
This part is a replacement control panel pushbutton assembly for the cleanup cycle Hot Spring spas. Crafted in grey to match your hot tub.
*Check specs section for full list of compatible models and years.
Specifications
|
NOTE: The thermostat control knob must be fully seated for the lock to engage.
NOTE: In early models, the light control knob must be turned all the way off to engage the lock. The locking of the light control knob was discontinued.
| Removal |
- Unlock the control panel.
- Turn the temperature and light knobs to the off position (counterclockwise).
- Remove the two phillips head screws securing the control panel to the skirting.
- Pull the control panel forward off the D-shaft drivers.
- Remove the two D-shaft drivers.
CONTROL PANEL INSTALLATION
- Place the D-shaft drivers onto the thermostat and light switch shafts.
- Turn the both shafts to the off position (counterclockwise).
- Ensure that the knobs of the control panel are still in the off position.
- Install the control panel onto the D-shaft drivers.
- Install the two phillips head screws securing the control panel to the skirting.
|
|
Reviews
There are no reviews yet.